DCPS

DCPS is a digitally controlled SMPS based DC power supply cum battery charger unit. It consists of 3 SMPS modules and 1 controller module to control and monitor all SMPS modules for load sharing. Each SMPS module supports up to 6A of load. Both float voltage and boost current is adjustable and pre-settable as per user requirements. It is also fully protected against overload and short circuit. Battery temperature compensation is also provided in case of high temperature rise in battery. It meets EMI/EMC safety standards as per EN norms.

Product Highlights

• Modular Design with N+1 configuration for redundancy
• Two SMPS modules (ASM2405AS) of 6A each for 3A load current and 1.7A Batt.
• Charging current
• One additional slot for add-on module
• Auto float-cum-boost charge mode
• Auto current sharing by each module
• Adjustable Float voltage and boost current
• MCB’s protection for battery
• In-built inrush current
• Input AC under/over voltage protected
• Auto shut off for input AC out of range
• Output over voltage, overload and short circuit protection
• Alarm Indication for Remote Monitoring
• Battery temperature compensated o/p voltage
• LCD display for monitoring
• Potential free contacts:
  • AC Fail / Out of range
  • Battery Low Pre-Cutoff
  • SMPS Module Fail/Off (Both on Controller and each SMPS Module)
• LED Indications:
  • AC OK
  • AC fail/out of range
  • Float charge mode
  • Boost charge mode
  • System overload
  • Load voltage Low
  • Over voltage
  • SMPS module fail/Off
  • Battery reverse polarity
  • Battery low/discharge
  • Battery fail/isolated
  • Battery temperature compensation fail