Super Capacitor Modules and Charger/DG Cranking Unit
General Details
Supercapacitor modules use activated carbon electrode for high performance. These super cap modules along with isolated charger are used for DG triggering in place of the battery which results in improved performance of the DG triggering in terms of product life and consistency.
Product Highlights
- Light weight.
- Supercapacitor operating temperature ranges from -40 °C to +60 °C
- The long service life of around 10 – 12 years.
- Environmentally safe.
- Virtually maintenance free.
- Isolated constant current charging method.
- Very less charging time compared to the battery.
- Very low discharge rate.
- Ease of maintenance.
Technical Info
| Capacitance | -200F |
| Capacitor voltage | -16V |
| Size | Approx. 330x210x89mm |
| Triggering cycles (full charged condition) |
Approx. 3 (depends on generator condition) |
| Safety | Capacitors are approved as per UL810A safety standard |
| RoHs compliance | Yes |
| Ingress protection | IP20 |
| Cabinet | Powder coating,no rusting |
AC to DC power supply /Charger
| Charger input voltage | 230Vac, 50Hz |
| Charger output voltage | 14.5Vdc |
| Charging current | 10Amps |
| Recharge time from OVdc | Approx. 10mins |
| Charging metdod | Constant current |
| Recharge time from 9Vdc | Approx. 3 mins |
| Protections | Output short circuit protected Output over voltage protected |
| Maximum dimensions | 185x110x55mm |
Applications
- DG Triggering Units